How the switch mode power supply circuit works? This is a simple explanation. A switching mode power supply operates by switching some sort of energy storage device between charging mode and discharging modes. Usually, the energy storage device is an inductor or a center tapped transformer, although switching capacitors may accomplish the same sort of goal.

how smps works

The key feature of switching power supply is energy efficiency in the conversion and regulation from AC or DC to a different level of DC, either approximately than the original. The energy is usually store as a magnetic field around an inductor, and the switching is controlled by a voltage comparator with a little hysteresis built in to prevent it from operating as a linear regulator. For further reference, SMPS repair guide ebook by Jestine Yong will help you in repairing various types of SMPS with fast and accurate.

Interference in Switching Power Supply. Do you have a problem with your machine after changing a good quality switching power supplies like Omron or Siemens? The problems similar like processor hangs out, and you have to reset the main electric supply very often. Sometimes works and sometime the problem exist. Do not justice if the problem come from your Power Supply.

You must check the power of you main supply voltage (it can be 220VAC or 380VAc). Just check for stability and the frequency, then you have to check the grounding and the cable which is coming from the main supply. After if everything is normal check the switching power supply with a multimeter if it is cutting the energy properly. After all these, you will found the problem. If you need more explanation, go to Switch Mode Power Supply Repair to understand the critical waveforms and voltages in many parts of the Switching Power Supply section thus helping you to easily diagnose the faults.

 

//